All information in this technical data sheet is tentative
and subject to change without notice.
3 ABSOLUTE MAXIMUM RATINGS
4 ELECTRICAL CHARACTERISTICS
5 INTERFACE PIN CONNECTION
6 INTERFACE TIMING
7 BLOCK DIAGRAM
8 MECHANICAL SPECIFICATION
9 OPTICAL CHARACTERISTICS
10 RELIABILITY TEST CONDITION
11 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
5, 6, 7
9, 10, 11
13, 14, 15
19, 20, 21
This specification applies to color TFT-LCD module, T-51513D104JU-FW-A-AF.
These specification papers are the proprietary product of OPTREX CORPORATIONoration
(“OPTREX) and include materials protected under copyright of OPTREX. No part of this document
may be reproduced in any form or by any means without the express written permission of
OPTREX does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a product specified in this document. No
license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual
property rights of OPTREX or of others.
OPTREX classifies the usage of the TFT-LCD module as follows. Please confirm the usage before
using the product.
(1) Standard Usage
Computers, office equipment, factory automation equipment, test and measurement
equipment, communications, transportation equipment(automobiles, ships, trains, etc.),
provided, however, that operation is not influenced by TFT-LCD directly.
(2) Special Usage
Medical equipment, safety equipment, transportation equipment, provided, however, that
TFT-LCD is necessary to its operation.
(3) Specific Usage
Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control systems,
life support systems and any other equipment. OPTREX should make a contract that
stipulate apportionment of responsibilities between OPTREX and our customer.
The product specified in this document is designed for “Standard Usage” unless otherwise specified
in this document. If customers intend to use the product for applications other than those specified
for “Standard Usage”, they should contact OPTREX sales representative in advance.
OPTREX has been making continuous effort to improve the reliability of its products. Customers
should implement sufficient reliability design of their application equipments such as redundant
system design, fail-safe functions, anti-failure features.
OPTREX assumes no responsibility for any damage resulting from the use of the product that does
not comply with the instructions and the precautions specified in this document.
Please contact and consult a OPTREX sales representative for any questions regarding this product.
T-51513D104JU-FW-A-AF is 10.4” color TFT-LCD (Thin Film Transistor Liquid Crystal Display)
module composed of LCD panel, driver ICs, control circuit, and backlight unit.
By applying 6 bit digital data 640 480, 262K-color images are displayed on the 10.4” diagonal
screen. Input power voltage is 3.3 V for LCD driving.
The type of data and control signals are digital and transmitted via CMOS interface per Typ. 25
MHz clock cycle.
Inverter for backlight is not included in this module. General specifications are summarized in the
Display Area (mm)
Number of Dots
211.2(H) 158.4 (V)
640 3 (H) 480 (V)
Pixel Pitch (mm)
0.33 (H) 0.33 (V)
Color Pixel Arrangement
RGB vertical stripe
Normally white TN
Number of Color
Wide Viewing Angle Technology
Optical compensation film
Viewing Angle (CR 10)
6565° (H) 45~65° (V))
Antireflection and hard-coating 2H
Optimum Viewing Angle (Contrast ratio)
Module Size (mm)
243.0 (W) 181.6 (H) 12.2 (D)
Module Mass (g)
CCFL, 2-tubes, edge-light, replaceable
Sign “( )”represents preliminary value. Characteristic value without any note is typical value.
|0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z|
This is a individually operated, non profit site.
If this site is good enough to show, please introduce this site to others.