DatasheetBay.com



D5702 (CEL) : Total 4 Pages

No Preview Available !

[ Download PDF for PC ]

www.DataSheet4U.com
NEC's 2.4 GHz
Si LD MOS POWER AMPLIFIER UPD5702TU
FEATURES
• MEDIUM OUTPUT POWER:
POUT = +21 dBm TYP @PIN = -2 dBm, f = 2.45 GHz
• ON CHIP OUTPUT POWER CONTROL FUNCTION
• SINGLE SUPPLY VOLTAGE:
VDS = 3.0 V TYP
• PACKAGED IN 8 PIN L2MM (2.0 X 2.2 X 0.5mm)
SUITABLE FOR HIGH- DENSITY SURFACE MOUNT
DESCRIPTION
NEC's UPD5702TU is a silicon LD MOS IC designed for use as
a power amplifier up to 2.4 GHz application. This IC consists of
two stage amplifiers. The device is packaged in a low cost,
surface mount 8 pin L2MM (Leadless Mini Mold) plastic pack-
age. Ideally suited for high density surface mount designs.
NEC's stringent quality assurance and test procedures ensure
the highest reliability and performance.
INTERNAL BLOCK DIAGRAM
Pout2 1
Pout2 2
GND 3
Pin1 4
8 Pin2
7 Pin2
6 GND
5 Pout1
APPLICATIONS
• 1.9 GHZ Application Ex. PHS etc.
• 2.4 GHz application Ex. Bluetooth, Wireless LAN, etc.
• General purpose medium power AGC amplifier
ELECTRICAL CHARACTERISTICS (TA = 25°C, VDS = 3.0 V, f = 1.9 GHz, unless otherwise specified)
SYMBOLS
IDS
VGS
POUT
PAE
Padj1
Padj2
IRL
ORL
ISOL
OBW
PART NUMBER
PARAMETERS AND CONDITIONS
Circuit Current, PIN = -5 dBm, POUT = +20.5 dBm
Gate Bias Voltage, PIN = -5 dBm, POUT = +20.5 dBm
Output Power, PIN = -5 dBm
Power Added Efficiency, PIN = -5 dBm, POUT = +20.5 dBm
Adjacent Channel Power 1, PIN = -5 dBm, POUT = +20.5 dBm
Adjacent Channel Power 2, PIN = -5 dBm, POUT = +20.5 dBm
Input Return Loss, PIN = -20 dBm
Output Return Loss, PIN = -20 dBm
Isolation, PIN = -20 dBm
Occupied Bandwidth, PIN = -5 dBm, POUT = +20.5 dBm
UNITS
mA
V
dBm
%
dBc
dBc
dB
dB
dB
dB
UPD5702TU
MIN TYP MAX
150
2.0
20.5
27
-61
-76
10
10
45
TBD
California Eastern Laboratories



No Preview Available !

[ Download PDF for PC ]

www.DUatPaSDhe5e7t40U2.cTomU
ABSOLUTE MAXIMUM RATINGS1
(TA = 25°C unless otherwise specified)
SYMBOLS
PARAMETERS
UNITS RATINGS
VDS Supply Voltage 1
V 6.0
VGS Supply Voltage 2
PD Power Dissipation2
V 6.0
W 0.866
TA
Operating Ambient Temp. °C
-40 to +85
TSTG
Storage Temp. Range
°C -65 to +150
PIN(MAX) Maximum Input Level
dBm
+10
Tj
Junction Temperature
°C
+150
Notes:
1. Operation in excess of any one of these conditions may
result in permanent damage.
2. TA = 25°C, mounted on 330 x 21 mm epoxy glass PWB.
RECOMMENDED
OPERATING CONDITIONS
SYMBOLS
PARAMETERS
UNITS MIN TYP MAX
VDS Supply Voltage 1
V 2.7 3.0 3.6
VGS Supply Voltage 2
V 0.0 0.2 –
PIN Maximum Input Power
dBm – +5 –
ID Drain Current
mA – 165 –
ORDERING INFORMATION
PART NUMBER
QUANTITY
UPD5702TU-E2-A
TBD
TYPICAL PERFORMANCE CURVES (TA = 25°C, f = 1.9 GHz, VGS = 2.0 V unless otherwise specified)
OUTPUT POWER, GAIN AND
ADJACENT CHANNEL POWER
vs. INPUT POWER
30 -20
VDS = 3.0 V,
VGS = 2.0 V,
f = 1.90 GHz,
25 PIN = -5 dB -30
20 -40
15 -50
10
5
0
-15
-60
Pout
Gain
Padj (-900 KHz) -70
Padj (-600 KHz)
Padj (+600 KHz)
-10 -5
Padj (+900 KHz)
-80
0 5 10
Input Power, PIN (dBm)
250
200
150
100
50
0
-15
CIRCUIT CURRENT
vs. INPUT POWER
-10 -5 0 5
Input Power, PIN (dBm)
10



No Preview Available !

[ Download PDF for PC ]

UPD5702TU
www.DataSheet4U.com
PACKAGE DIMENSIONS (Units in mm)
Top View
PACKAGE OUTLINE TU
Bottom View
0.4
1.4
0.1
Side View
0.4
0.25 0.25
0.75 0.75
0.16
0.5
2.0
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably
be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify CEL for all damages resulting from such improper use or sale.
02/04/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.



No Preview Available !

[ Download PDF for PC ]

www.DataSheet4U.com
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Lead (Pb)
Mercury
Cadmium
Hexavalent Chromium
PBB
PBDE
Concentration Limit per RoHS
(values are not yet fixed)
< 1000 PPM
< 1000 PPM
< 100 PPM
< 1000 PPM
< 1000 PPM
< 1000 PPM
Concentration contained
in CEL devices
-A
Not Detected
-AZ
(*)
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
5-4






[ Download PDF for PC ]






0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
* 2015 :: DatasheetBay.com :: DatasheetBay