DatasheetBay.com



B69813N1477A840 (EPCOS) : Total 4 Pages

No Preview Available !

[ Download PDF for PC ]

Microwave Ceramics and Modules
3-Pole Filter for WSP
Preliminary Data Sheet
Filter
B69813N1477A840
Features
zwww.DataSheet4U.com SMD filter consisting of coupled resonators with stepped impedances
z (NdBa)TiO3 (εr = 88 / TCf = 0±10 ppm/K) with a coating of copper (10µm) and tin (>5µm)
z Excellent reflow solderability, no migration effect due to copper/tin metallization
Index
Page 2
Page 3
Page 4
Component drawing
Recommended footprint
Characteristics
Maximum ratings
Typical passband characteristic
Processing information
Soldering requirements
Delivery mode
ISSUE DATE
19.03.04
ISSUE
P5 PUBLISHER
SAW MWC PD
PAGE 1/4



No Preview Available !

[ Download PDF for PC ]

Microwave Ceramics and Modules
3-Pole Filter for WSP
Preliminary Data Sheet
Component drawing
Filter
B69813N1477A840
View from below onto the solder terminals and view from beside
Recommended footprint
I/O
GG
I/O
G
G
ISSUE DATE
19.03.04
ISSUE
P5 PUBLISHER
SAW MWC PD
PAGE 2/4



No Preview Available !

[ Download PDF for PC ]

Microwave Ceramics and Modules
3-Pole Filter for WSP
Preliminary Data Sheet
Characteristics
Center frequency
Insertion loss
Passband
1dB Bandwidth
Amplitude ripple (peak - peak)
Standing wave ratio
Impedance
Attenuation
DC to 1262 MHz
at 1262 to 1350 MHz
at 1350 to 1380 MHz
at 1380 to 1400 Mhz
at 1660 MHz
Maximum ratings
IEC climatic category (IEC 68-1)
Operating temperature
Typical passband characteristic
Filter
B69813N1477A840
min.
fc -
αIL
B 40
∆α
SWR
Z
α
40
30
25
15
30
typ.
1472
1.8
60
0.3
1.5
50
47
35
28
18
31
max.
-
2.3
1.0
2.0
MHz
dB
MHz
MHz
dB
dB
dBc
dB
dB
dBc
- 40/+ 90/56
Top - 20 / + 85
°C
0
-10
-20
-30
-40
-50
-60
frequency [GHz]
DB[S11]
DB[S21]
ISSUE DATE
19.03.04
ISSUE
P5 PUBLISHER
SAW MWC PD
PAGE 3/4



No Preview Available !

[ Download PDF for PC ]

Microwave Ceramics and Modules
3-Pole Filter for WSP
Preliminary Data Sheet
Processing information
z Wettability acc. to IEC 68-2-58: 75% (after aging)
Soldering Requirements
Profile for eutectic
SnPb solder paste
Soldering type
reflow
Maximum soldering temperature
235 (max. 2 sec.)
(measuring point on top surface of the component) 225 (max. 10 sec.)
Recommended soldering conditions (infrared):
Temp. [°C]
within 10 sec.
Temp. [°C]
215°C±10°C
Filter
B69813N1477A840
Profile for leadfree
solder paste
reflow
260 (max. 2 sec.) °C
250 (max. 10 sec.) °C
within 10 sec.
245°C±5°C
40-80 sec.
20-40 sec.
Time [sec.]
Delivery mode
z Blister tape to IEC 286-3, polystyrol, grey
z Pieces/tape: 1500
Tape:
Profile B-B:
2.5 °C/s
2-3 min.
30 sec.
Time [sec.]
> - 5 °C/s
Reel:
Profile A-A:
I/O
A
BB
A
direction of unreeling
EPCOS AG 2001. All Rights Reserved. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
The information contained in this data sheet describes the type of component and shall not be considered as guaranteed characteristics.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry
recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed.
ISSUE DATE
19.03.04
ISSUE
P5 PUBLISHER
SAW MWC PD
PAGE 4/4





[ Download PDF for PC ]





0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
* 2015 :: DatasheetBay.com :: DatasheetBay